Aquaguard Skid Mounted RO Plant
Introduction
Skid Mounted Reverse Osmosis Plants are designed and built to deliver water suitable for diverse utilization purposes and various industrial process requirements. They are ideal for small hotels, schools/ institutions, nursing homes, commercial establishments and light industries.
Features
SYSTEM FEATURES
- Completely assembled / pre-piped / pre-wired
- Auto start / stop based on water level in the tank
- MCB for plant protection
- Raw water pump integrated with plant
- Microprocessor based control panel for ease of operation and inbuilt process logic
- Blending cartridge provision to adjust taste / TDS and followed by ultra violet disinfection for total safety
- Inbuilt protection to high pressure pump by way of low pressure switch / high pressure switch
- Integrated pre-treatment module for removal of suspended solids along with pressure gauges
- Robust high pressure pump in SS 304 construction
- Automatic backwashing of filters available as premium range
- Online rota-meter for measuring permeate flow
- Membranes from GE / Hydranautics
- PU coated MS skid & plated hardware
- Glycerin filled SS pressure gauges for durability
Standard Instrumentation
- Pressure Gauges
- Level Switch
- Rota Meter
- Conductivity Meter
- Pressure Switches
OPTIONS
- Automatic backwashing of filters
- pH correction system
- Post UV system
- Cleaning system
- Post treatment system
- Remote monitoring system
Raw Water Characteristics
- Hardness: 200-500 ppm
- Alkalinity: 200-300 ppm
- Chlorides: 300-400 ppm
- Nitrates: 20-40 ppm
- Silica: 10-15 ppm
- Total Dissolved Solids (TDS): 500-2000 ppm (max)
Limiting Conditions for RO Feed Water
- Turbidity: < 5 NTU
- Organics: Nil
- Maximum Water Temperature: < 40° C
- Iron: < 0.3 ppm
- Fluoride: < 1 ppm
- Silt Density Index (SDI): < 5 ppm
- Oil & Grease: Nil
- Free Chlorine: Nil
Meet our Water Expert
He will recommend a solution customised to your needs.
| Technical Specifications | ||||
| OPERATING SPECIFICATIONS | UNIT | RO - 100 | RO - 250 | RO - 500 |
| Maximum Flow | LPH | 100 | 250 | RO - 500 |
| Average Flow | LPH | 100 | 250 | RO - 400 |
| Inlet TDS | mg/l | 500- 1500 (Max) | 500 - 2000 (Max.) | 500 - 2000 (Max.) |
| Permeate TDS | mg/l | < 150 | < 150 | < 150 |
| Recovery | % | 20 | 20 | 30 |
| SYSTEM SPECIFICATIONS | UNIT | RO - 100 | RO - 250 | RO - 500 |
| Particulate Filter | 10 Micron, 4'' x 20" | - | - | |
| Activated Carbon Block | 4''x20" | - | - | |
| Pressure Sand Filter (PSF) Capacity | LPH | - | 1000 | 1200 |
| Activated Carbon Filter (ACF) Capacity | LPH | - | 1000 | 1200 |
| Antiscalant Dosing System | Yes | Yes | Yes | |
| Antiscalant Dosing Tank Capacity | Liters | 20 | 20 | 20 |
| Micron Cartridge Filter (PP) | 5 Micron, 20" Long | 5 Micron, 10" Long | 5 Micron, 20" Long | |
| High Pressure Pump (HPP) | 1000 LPH, 1.1 kw | 1000 LPH, 1.1 kw | 1200 LPH, 1.1 kw | |
| RO Membrane | 4"x40" | 4"x40" | 4"x40" | |
| UV | No | Yes | Yes | |
| Plant Dimensions (lxwxht) | mm | 600 x 800 x 1640 | 1000 x 800 x 1700 | 1000 x 800 x 1700 |
| Weight (Approximately) | kg | 200 | 250 | 310 |
| Power Supply | 415 V AC, 3 Phase, 4 Wire, 50 Hz | |||
Technical specifications are subject to change without prior notice due to continuous
product improvement
